Any questions?
Compressor condensing unit PS.KSK.01.ZB48
309 664 RUB.
Compressor-condensing unit POLUS-SAR PS.KSK.01.ZB48 is widely used: from outdoor installations (Bonnet type freezers, showcases, etc.) to maintaining a given temperature range in the storage chambers. .
| Basic specifications | |
|---|---|
| Name | PS.KSK.01.ZB48 |
| Ambient temperature | 30°С |
| Minimum charge of Freon R404A | 10 kg |
| Rated input power | 6.39 kW |
| Maximum operating current | 12.06 А |
| Receiver volume | 10 L |
| Power supply | 380 V/3 Ph/50 Hz |
| Packing dimensions | 1450 mm * 800 mm * 1500 mm |
| Product dimensions | 1249 mm * 580 mm * 1260 mm |
| Gross weight | 229.5 kg |
| Compressor | |
|---|---|
| Manufacturer, model | Copeland ZB48 |
| Type | Hermetic |
| Equivalents | DANFOSS MLZ 048 INVOTECH YM125E |
| Compressor-condensing unit | |
|---|---|
| Refrigeration capacity | 11.2 kW |
| Stiffener spacing | 2 mm |
| Surface area | 42.5 m2 |
| Number of fans | 2 pcs |
| Rated input power | 866 W |
| Fan diameter | 500 mm |
| Fan capacity | 9167 m3/h |
| Piping | |
|---|---|
| Discharge | 5/8* |
| Suction | 1 1/8* |
| Liquid | 5/8* |
*Not included
| Electric cable | |
|---|---|
| External power cable | PVC-insulated 5*2,5 |
Standard Features:
— pressure switch for condensation
— crankcase heating element
— liquid receiver
— check valve in front of the receiver
— liquid line filter, sight glass
— pressure gauges
— unit inlet and outlet valves
— low-noise six-pole fan (except for models ZB58, ZBD58, ZF49, ZFD49)
— Schneider Electric automation control panel
— turn-on delay switch module
Additional options (can be ordered separately):
| S – compressor compartment soundproofing | 9 400 rubles |
| SC – Danfoss XGE-4C fan speed controller | 6 990 rubles |
| KVR – winter set (KVR+NRV+NRD) | 14 500 rubles |
| LS – heat-insulated liquid separator | 4 100 rubles |
| ОS – oil separator with a sight glass and a tap | 6 750 rubles |
| F – filter on the suction line | 6 650 rubles |
Freon lines diameters are calculated separately using special methods and programs, taking into account the specifics of the piping at the installation site.
